Commercial & Trade Work

Here at Maldon Shot Blasting & Powder Coating Ltd carry out trade work high and long lasting standard.

We are very aware that other’s offer a cheaper service, however we DO NOT cut corners and offer a professional service.

The material governs the approach we take on the first stage preparation.

Steel work will be blast cleaned where required to remove mill scale and any surface rust.

Primers and Polyester coatings

All parts may be blast cleaned or de-greased & phosphated as standard practice and can have a self-healing AKZO NOBLE (PZ770) primer applied as an optional extra and semi cured a polyester coat then applied to the primer, this is normally done whilst the work is still hot from the fist stage, this allows better adhesion and promotes further coverage in the hard to reach places as joints and corners.

If you are on a fixed cost we will offer just a one coat system, this in it self will stand the test of time as all commercial parts are de-greased & phosphated.

For extra and very long lasting protection

The advantages of using Plascoat over normal powder coating products are many fold, acid and salt resistant, chip proof and very flexible.

Plascoat is ideal for protection of Railing work, flat sheet steel or any other material

With a colour range, for further information please visit:- http://www.plascoat.com.

Plascoat can have a further polyester topcoat applied to achieve another colour not available in the Plascoat range facilitating ultimate protection and the colour choice required.

Thermoplastic coatings offer a thick protective layer to the metal and are often used either to protect the underlying e-coat from chip or impact damage or to provide a “cushion” effect for parts that are in contact with each other.

excellent properties of Plascoat

Flexibility, can be stretched 1000% before coating fails.
Damage to coating can be repaired easily be repaired.
Significantly higher UV resistance.
Very low toxicity.
No plasticisers, chlorine or halogens.
Low temperature performance to -70°C.
Does not shrink or become brittle in hot weather.
Harder coating.
Higher impact strength
Higher stone chip resistance.
Salt & acid resistant.
Will not fade or peel.

Please feel free to call us to discuss your projects, or you want to know more about our processes and how we can help you.

We have many years experince in car body shell blasting.
If you would like advice or discuss options for your car body blasting project, please do not hesitate to get in touch.