*(subject to the condition of parts) See T&C's
bicycle frame paint removal
1. Steel frames are normally dipped in an alkaline paint remover, then cleaned to remove all remaining paintwork and any corrosion.
2. Aluminium or alloy frames will then be bead blast cleaned. This is less aggressive than overblast cleaning, yet it still provides a good key for the prime coat.
3. Once the blast or cleaning stage is completed, the work is visually checked over for damage, such as cracks or broken weld joints. Should any problems be found, we will report back to you.
4. The frame and other parts are placed into our Phosphating and wash plant for a final and complete deep clean. The phosphate helps further to etch into the work and therefore will give a far longer life.
Prepping the bicycle frame
5 . Masking off, all the threads and raceways making ready for the primer coats.
6. Apply our zinc epoxy-polyester primer coat at an average of 50 microns per coat.
7. Put through the semi curing stage @130d cent.
8. Apply the colour coat of polyester powder and fully cure until both the primer & topcoat have fully bonded to the work.
Colour and Finishes
At MSB, we offer a variety of finishes for bike frames, from powder-coated special effects to standard RAL colours. We also provide a selection of 2k wet paints and Cerakote finishes for carbon fibre parts and frames, along with decal fitting and clear coats. Moreover, MSB has over 25 years of experience in the industry, so you can be confident that the work will be completed to a high standard.
Fitting of decals
Decals can be fitted and must be supplied by the client. This will require a protective 2 pack lacquer to be applied and the costs start at £90.00 plus vat. Decals supplied must be compatible for 2 pack finish.
SOME Powder Coated Bike Examples
For more examples please see OUR WORK Gallery
BIKE FINISHE EXAMPLES
ILLUSION RANGE
Bike frames from our illusion range. including our illusion sour apple and Illusion Orange.
RANGE OF POWDER COATED COLOURS
For full colour selections please take a look at our colour guides
SPECTRA PURPLE, DECALS AND WET COAT LACQUER FINISH
Made in the USA, re coated by MSB….
DECETALS
Decals have been applied to these newly restored bicycle frames with a clear coated lacquer applied for added protection.
METALLIC FINISHES
From silvers and golds to colourful metallic finishes like Blueberry and Dazzling Pink
​
Chrome Silver Powder Coat with Diamond Clear Lacquer
Chrome, along with steel tubesets is en vogue once again and while there's no denying its allure when gleaming seductively in the afternoon sun, electro plating remains a nasty process and one that presents all manner of headaches when refinishing. Many myths surround electroplate, the most common being that copper is employed for corrosion resistance (it is in fact, used to create an ultra smooth surface for the latter layers of super bright nickel responsible for the characteristic mirror effect).…
MULTICOLOUR FINISH
Looking to stand out from the crowd. Multi colour fade metallic powder coating.
BMX Frame Powder Coating Projects
SPECIAL FINISHES
Range of bikes finished in our special finishes. including orange burst and city lights
